RG 250/2 3+0 Supergrip
2-layer rubber belt of thickness 5.5 mm with fabric underside for slide support and rubber top layer with super grip profile
General Features:
Belt provided with a wear-resistant rubber coating provided with the Supergrip profile, which provides excellent grip on boxes, bags, crates, plates, etc.
Strap has fabric underlay. These belts are used for walking on slide support. Given the low friction of the tire on the underside, the drive drum must be covered with rubber, type ETR70 (black, checked). A ceramic covering should not be used with belts with a sliding bottom, as this will damage the fabric on the underside.
Technical Data:
Type | RG 250/2 3+0 SG (In stock) |
Coating quality | Type Y, with Supergrip profile |
Number of inserts | 2 |
Tensile strength | 250 N/mm |
Band thickness | 5.5mm |
Thickness of top layer | 3 mm, with Supergrip profile |
Thickness of undercoating layer | 0 mm (fabric backing) |
Minimum drum diameters | 150mm |
Standard Widths (in stock):
DIN 22102 Standard Widths: 500, 600, 650, 800, 1000, 1200, 1400, 1600, and 2000 mm. Other widths can be cut.
DIN 22102 Permitted Length Tolerances:
Endless welded belts
-Up to 15,000 mm length: +/- 50 mm
-From 15,000 to 20,000 mm length: +/- 75 mm
-Longer than 20,000 mm: +/- 0.5%
Non-Endless (Open) Tapes
-In one length: + 2.5%
-In multiple lengths:
-Each part length: +/- 5%
-Total of the part lengths: + 2.5%
-Stock lengths: +/- 5%
DIN 22102 Allowed Width Tolerances:
Band widths 300, 400 and 500 mm: +/- 5 mm
Belt widths from 650 mm to 3200 mm: +/- 1%