top of page
Cementmuur

Rota Oil 250/2 3+1.5 (In Stock)

2-ply belts, oil and grease resistant, thickness 6.5 mm, 250 N/mm, for lighter applications

2-ply belts, oil and grease resistant, thickness 6.5 mm, 250 N/mm, for lighter applications
General Features:

  • Always a Rotacure Product: covering layers are more homogeneous and the strip has the same thickness everywhere.

  • For our Rota Oil tires we do not use a rubber mix with SBR rubber, but pure NBR (Nitrile) rubber. This makes the Rota Oil belts highly oil and grease resistant, also resistant to mineral oil, such as formwork oil.

  • Type G according to DIN 22102 is meaningless, because the standard does not say to what extent the tire is oil and

    Must be grease resistant. Our Rota Oil tire is 100% oil resistant!



Technical Data:

Type

Rota Oil 250/2 3+1.5 (In Stock)

Coating quality

Type G OIL, oil and grease resistant

Number of inserts

2

Tensile strength

250 N/mm

Band thickness

6.5mm

Thickness of top layer

3mm

Thickness of undercoating layer

1.5mm

Minimum drum diameters

160mm


Standard Widths (in stock):

DIN 22102 Standard Widths: 300, 400, 500, 600, 650, 700, 800, 1000, 1200, 1400, 1600, 1800, 2000 mm. Other widths can be cut. Wider than 2 m also possible, using hot longitudinal welding.



DIN 22102 Permitted Length Tolerances:

Endless welded belts

-Up to 15,000 mm length: +/- 50 mm

-From 15,000 to 20,000 mm length: +/- 75 mm

-Longer than 20,000 mm: +/- 0.5%


Non-Endless (Open) Tapes

-In one length: + 2.5%

-In multiple lengths:

-Each part length: +/- 5%

-Total of the part lengths: + 2.5%

-Stock lengths: +/- 5%



DIN 22102 Allowed Width Tolerances:

  • Band widths 300, 400 and 500 mm: +/- 5 mm

  • Belt widths from 650 mm to 3200 mm: +/- 1%

Data Sheet

bottom of page