Rota Oil 400/3 3+0 (In Stock)
Rubber conveyor belt for sliding plate support in oil and grease resistant quality. This belt type is in stock until bandwidth 3,000 mm
General Features:
Belt produced on the RotaCure presses. This gives a nice flat belt, with a homogeneous coating.
We produce the 3+0 version with extra thick intermediate rubber between the layers. This makes the belt more stable and therefore remains even more flat.
Belt has fabric underlay. These belts are used for running on slide support. Given the low friction of the belt on the underside, the drive drum must be covered with rubber, type ETR70 (black, diamond profile). A ceramic covering should not be used with belts with a sliding bottom, as this will damage the fabric on the underside.
Rota Oil is oil and grease resistant according to DIN 22102 type G.
This belt type is in stock up to a belt width of 3,000 mm
Technical Data:
Type | RO 400/3 3+0 Rota Oil (In stock) |
Coating quality | Type G, oil and grease resistant |
Number of inserts | 3 (Extra thick and stable tissue package) |
Tensile strength | 400 N/mm |
Band thickness | 7mm |
Thickness of top layer | 3mm |
Thickness of undercoating layer | 0 mm (fabric backing) |
Minimum drum diameters | 200mm |
Standard Widths (in stock):
DIN 22102 Standard Widths: 500, 600, 650, 800, 1000, 1200, 1400, 1600, 2000, 2100, 2400 and 3000 mm. Other widths can be cut.
DIN 22102 Permitted Length Tolerances:
Endless welded belts
-Up to 15,000 mm length: +/- 50 mm
-From 15,000 to 20,000 mm length: +/- 75 mm
-Longer than 20,000 mm: +/- 0.5%
Non-Endless (Open) Belts
-In one length: + 2.5%
-In multiple lengths:
-Each part length: +/- 5%
-Total of the part lengths: + 2.5%
-Stock lengths: +/- 5%
DIN 22102 Allowed Width Tolerances:
Band widths 300, 400 and 500 mm: +/- 5 mm
Belt widths from 650 mm to 3200 mm: +/- 1%