Rota Oil 500/4 6+2 (In Stock)
4-ply belt oil and grease resistant, thickness 12 mm, 500 N/mm, for heavy duty applications
General Features:
Always a Rotacure Product: covering layers are more homogeneous and the belt has the same thickness everywhere.
For our Rota Oil belts we do not use a rubber mix with SBR rubber, but pure NBR (Nitrile) rubber. This makes the Rota Oil belts highly oil and grease resistant, also resistant to mineral oil, such as formwork oil.
Type G according to DIN 22102 is meaningless, because the standard does not say to what extent the belt is oil and
be grease resistant. Our Rota Oil belt is 100% oil resistant!
Technical Data:
Type | Rota Oil 500/4 6+2 (In Stock) |
Coating quality | Type G OIL, oil and grease resistant |
Number of inserts | 4 |
Tensile strength | 500 N/mm |
Belt thickness | 12mm |
Thickness of top layer | 6mm |
Thickness of undercoating layer | 2mm |
Minimum drum diameters | 270mm |
Standard Widths (in stock):
DIN 22102 Standard Widths: 300, 400, 500, 600, 650, 700, 800, 1000, 1200, 1400, 1600, 1800, 2000 mm. Other widths can be cut. Wider than 2 m also possible, using hot longitudinal joining.
DIN 22102 Permitted Length Tolerances:
Endless welded belts
-Up to 15,000 mm length: +/- 50 mm
-From 15,000 to 20,000 mm length: +/- 75 mm
-Longer than 20,000 mm: +/- 0.5%
Non-Endless (Open) Belts
-In one length: + 2.5%
-In multiple lengths:
-Each part length: +/- 5%
-Total of the part lengths: + 2.5%
-Stock lengths: +/- 5%
DIN 22102 Allowed Width Tolerances:
Band widths 300, 400 and 500 mm: +/- 5 mm
Belt widths from 650 mm to 3200 mm: +/- 1%