RW 1000/4 8+3 (In Stock)
4-plyr belt, thickness 16.6 mm, 1000 N/mm, for extremely heavy-duty applications with high wear on the top covers
General Features :
Increased adhesion between inlay package and top layers - Homogeneous top layers (good functioning of scrapers)
Complete belt produced and tested in the Narviflex Lab to meet the highest class according to DIN 22102 type W
DIN 22102 type W tyres are the most wear-resistant (wear value guaranteed < 90 mm3). Generally, the tyres that are on the market in the Benelux have only a very moderate wear value of < 150 mm3 (Type Y). In this case, the following applies: the lower the wear value, the less volume loss in the abrasion test according to the DIN standard and the less material that can be abraded during the test, the more wear-resistant the tyre!
Technical Data :
Type | RW 1000/4 8+3 (In Stock) |
Topcoat quality | Type W, highest anti-wear class |
Number of inserts | 4 |
Tensile strength | 1000 N/mm |
Tire thickness | 16.6mm |
Thickness of top layer | 8mm |
Thickness of undercoat layer | 3mm |
Minimum drum diameters | 500 mm |
Standard Widths (in stock):
DIN 22102 Standard Widths: 1200 & 1400 mm. Other widths on request.
DIN 22102 Permitted Length Tolerances:
Endless welded belts
-Up to 15,000 mm length: +/- 50 mm
-From 15,000 to 20,000 mm length: +/- 75 mm
-Longer than 20,000 mm: +/- 0.5%
Non-Endless (Open) Belts
-In one length: + 2.5%
-In multiple lengths:
-Each part length: +/- 5%
-Total of the part lengths: + 2.5%
-Stock lengths: +/- 5%
DIN 22102 Permitted Width Tolerances:
Band widths 300, 400 and 500 mm: +/- 5 mm
Belt widths from 650 mm to 3200 mm: +/- 1%