RW 400/3 6+2 (In Stock)
3-ply belt, thickness 11 mm, 400 N/mm, for all-round applications with high wear on the covering layer
General Features:
Increased adhesion between layer package and covering layers - Homogeneous covering layers (scrapers work well)
Entire belt produced and tested in the Narviflex Lab so that it meets the highest class according to DIN 22102 type W
DIN 22102 type W tires are the most wear-resistant (wear value guaranteed < 90 mm3). Usually the tires that are on the market in the Benelux only have a very moderate wear value of < 150 mm3 (Type Y). In this case, the lower the wear value, the less volume loss during the abrasion test according to DIN standard and the less material that can be abraded during the test, the more wear-resistant the tire!
Technical Data:
Type | RW 400/3 6+2 (In Stock) |
Coating quality | Type W, highest anti-wear class |
Number of inserts | 3 |
Tensile strength | 400 N/mm |
Band thickness | 11mm |
Thickness of top layer | 6mm |
Thickness of undercoating layer | 2mm |
Minimum drum diameters | 250mm |
Standard Widths (in stock):
DIN 22102 Standard Widths: 650, 800, 1000, 1200 mm. Other widths can be cut. Wider also possible, using a hot longitudinal weld.
DIN 22102 Permitted Length Tolerances:
Endless welded belts
-Up to 15,000 mm length: +/- 50 mm
-From 15,000 to 20,000 mm length: +/- 75 mm
-Longer than 20,000 mm: +/- 0.5%
Non-Endless (Open) Tapes
-In one length: + 2.5%
-In multiple lengths:
-Each part length: +/- 5%
-Total of the part lengths: + 2.5%
-Stock lengths: +/- 5%
DIN 22102 Allowed Width Tolerances:
Band widths 300, 400 and 500 mm: +/- 5 mm
Belt widths from 650 mm to 3200 mm: +/- 1%