Narvistar Green 85 FB
Narvistar Premium PU of dark green colour, in the hardness of 85 sh A. One side is provided with cotton fabric, which ensures that the material can be excellently bonded to metal and stainless steel.
Material | Premium PU |
Back | One side PU, the other side cotton fabric |
Adhere | The cotton fabric layer is intended to allow the material to adhere to steel or stainless steel. Fabric adheres very well, whereas PU is very difficult to adhere. |
Colour | Dark green |
Hardness | 85 sh A |
Oil and grease resistance | Excellent |
Wear value | < 30 mm³ |
Elasticity at break | >650% |
Breaking strength | 47.9 MPa |
Permissible Temperature Range | -40°C to +80°C |
Properties and Applications :
Narvistar Green 85, with a hardness of 85 sh A, possesses the ideal hardness, non-stick properties, and wear resistance for use as lining for hoppers and cones in the concrete and sand industries.
Narvistar Green 85 FB is the adhesive version of the Narvistar Green 85, due to the cotton fabric backing. As a result, the material is used for bonding to steel and stainless steel plates, hoppers, and discharge points.
Highly wear- and cut-resistant
Non-stick
Oil and grease resistant
Captures impact and sound
Not food approved
Thicknesses in stock: 6, 8 and 10 mm
We have the material in stock on a roll (1,400 mm wide), allowing longer lengths to be cut from a single piece.
Don't forget: Narviflex can do the upholstery for you from our numerous branches, or you can send us the piece to be upholstered and we will do the upholstery in one of our workshops.
If you are not going to apply adhesive, then you do not need this version and you are better off using the version without "FB" , without cotton cloth. Click HERE to view it.
