Materials for Lagging

The most well-known drum lagging in black, wear-resistant rubber, provided with the diamond profile

Black, checked drum lining, which is oil and grease resistant. O.a. to line pulleys used in the recycling sector

In wet and dirty conditions, the TrackGrip checkered rubber coating may provide insufficient grip. In that case, it is best to switch to Narvicera EVO (Thickness: 15 mm), with solid ceramic tiles featuring a studded profile.

Zwarte, gladde (zonder profiel), slijtvaste bekleding van 60 sh A (Beschikbare diktes : 6, 8, 10, 15, 20 en 30 mm). Deze bekleding is, niet vergelijkbaar met een klassieke SBR rubber, maar gemakkelijk een factor 10 slijtvaster en sterker dan klassieke SBR.

Black, smooth (without profile), wear-resistant lagging of 60 sh A

Red/Pink lagging, very soft (35 sh A) and elastic

Rood/Roze bekleding, slijtvast, zeer zacht (35 sh A) en elastisch (Beschikbare diktes : 2, 3, 5, 6, 8 en 10 mm).

Yellowfine is a soft (45 sh A) and elastic lagging, which is abrasion resistant and has excellent impact resistance

Our best premium PU sheet for hopper and transfert point lining. Equipped with expanded metal back.

Narvistar Premium PU of dark green colour, in the hardness of 85 sh A. One side is provided with cotton fabric, which ensures that the material can be excellently bonded to metal and stainless steel.

Wear-resistant PU plate (dimensions 610 x 305 mm) of 16 mm thickness, with integrated strong magnets to quickly protect against wear at a pouring point.

Our hardest PU lining sheet for sharp products and unique due to its high non-stick properties

These covers/sleeves are applied by Narviflex to carrier rollers and are made of white, food-safe polyurethane and provide good grip and protection for your product.

Celprotect is a foam rubber, provided with a PU coating on one side and a cloth/tricot on the other side. Ideal for protection and to absorb the fall of products.

White rubber B571 from Trelleborg, EU food approved, oil and grease resistant (Available thicknesses: 2, 3, 4, 5, 6, 8 and 10 mm)

A white, food-approved PVC covering, thickness 2.5 mm, with the nipple profile

The TracGrip is also available in a white version for use in food environments. EU 1935/2004 food approved (Thickness: 8 mm)

White NBR/Nitrile, food-safe, with transverse rib coating (Available thickness: 8 mm)

A blue, food-approved PVC covering, thickness 2.5 mm, with the nipples profile

A blue, food-approved PVC covering, thickness 4.8 mm, with an easy-to-clean cross rib profile for extra grip